The Silkland DP80 DisplayPort Cable review is for gamers who need a short connection between a DisplayPort-equipped PC and monitor, with bandwidth aimed at high-resolution, high-refresh-rate setups.
Its 1.6-foot length is a useful fit when devices sit close together, but leaves little room for routing or repositioning.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short, high-bandwidth cable for gamers connecting DisplayPort 2.1 monitors and graphics cards at high refresh rates.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
- Gaming and display features include VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Male-to-male DisplayPort connectors with a no-latch design; backward compatibility with DisplayPort 2.0 and 1.4.
Pros
- High bandwidth and support for demanding resolution and refresh-rate combinations.
- Gaming-focused features include VRR, ALLM, and DSC 1.2a.
Consider before buying
- At 1.6 feet, it offers little slack for a PC positioned farther from the display or for routing around a desk.
- The highest listed modes depend on compatible graphics hardware, monitor support, and DSC where specified.
Read the full review summary
This cable pairs a VESA-certified DisplayPort 2.1 design with support for up to 80Gbps and a broad set of resolution and refresh-rate modes.
The listed capabilities include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher combinations are listed with DSC enabled.
Those are upper limits, not settings every PC and monitor can use: both ends of the connection need to support the relevant mode.
The practical appeal is the combination of a very short run and gaming-focused features such as VRR, ALLM, FEC, DSC 1.2a, and MST. It is aimed at a close, direct PC-to-monitor connection, especially where cable slack is undesirable.
Buyers planning a longer route, or using equipment with older DisplayPort versions, should check the desired resolution and refresh rate against both devices before choosing.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
Up to 80Gbps and UHBR20 support target demanding high-refresh-rate display setups.
Resolution and refresh flexibility
Supports several high-end modes, including uncompressed 4K at 240Hz and higher combinations with DSC.
Gaming features
VRR, ALLM, FEC, DSC 1.2a, and MST address common gaming and multi-monitor needs.
Build and handling
A nylon exterior, triple shielding, tinned copper conductors, and a no-latch connector design are useful construction details.
Compatibility range
Designed for DisplayPort devices and backward compatible with DP 2.0 and 1.4, though available modes depend on connected hardware.
Cable reach
The 1.6-foot length suits close placements but limits flexible routing and desk layouts.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
- Gaming and display features include VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Male-to-male DisplayPort connectors with a no-latch design; backward compatibility with DisplayPort 2.0 and 1.4.
- Construction includes 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
- The 1.6-foot cable is intended for indoor use and includes a 24-month service period.
Pros and Cons of Silkland DP80 Cable
Pros
- High bandwidth and support for demanding resolution and refresh-rate combinations.
- Gaming-focused features include VRR, ALLM, and DSC 1.2a.
- Short length can keep a close PC-to-monitor connection tidy.
- Shielding, tinned copper conductors, and a nylon exterior provide a substantial construction specification.
Consider before buying
- At 1.6 feet, it offers little slack for a PC positioned farther from the display or for routing around a desk.
- The highest listed modes depend on compatible graphics hardware, monitor support, and DSC where specified.
- A no-latch connector may be easier to remove, but buyers who prefer a locking connection should consider that handling preference.
Who Should Buy Silkland DP80 Cable?
Good fit
Choose the Silkland DP80 if your computer and monitor sit close together and you want a short DisplayPort cable for a high-refresh-rate gaming setup.
Its bandwidth and feature set leave room for demanding modes, while the compact reach can help avoid a coil of unused cable behind the desk.
It makes the most sense when both connected devices support the DisplayPort capabilities you plan to use.
Check the monitor's input specifications and the graphics card's output support for your target resolution and refresh rate, including whether DSC is needed for a particular combination.
The build details may also appeal if the cable will be plugged and unplugged during setup: the no-latch connector avoids a release tab, while the nylon exterior and triple shielding are designed for a durable, interference-conscious connection.
Who should skip it
Skip this length if your PC is under a desk, across a room, or otherwise far from the monitor; the short reach can make routing impractical.
Look elsewhere if your setup depends on a DisplayPort connection longer than 1.6 feet, or if you specifically want a locking connector.
How the Silkland DP80 Cable Fits a Gaming Setup
Bandwidth and display modes
The DP80 is specified for up to 80Gbps, with uncompressed 4K at 240Hz among its listed modes. It also lists higher resolution and refresh combinations with DSC enabled.
These figures describe supported ceilings; the graphics card, monitor, settings, and any required compression support determine which mode a system can actually run.
A short cable for a close connection
At 1.6 feet, this cable is best suited to a PC and monitor that are near each other.
That can work well for a compact desk or a close connection at the rear of a setup, but measure the actual route before buying.
Allow for the path around ports and furniture rather than measuring only the straight-line distance.
Gaming and multi-monitor features
VRR, ALLM, and FEC are included alongside DSC 1.2a, while MST is listed for multi-monitor use.
These features make the cable relevant to gaming and display configurations that use them, but each connected device must also support the desired feature.
For a multi-screen setup, confirm the planned connection types and monitor arrangement before selecting cables.
Connector and cable construction
The design uses 28AWG tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior. The connector has no latch, so removal does not require pressing a release tab.
Consider how often you handle the cable and whether that connector style suits the space around your PC and monitor.
Alternatives to Silkland DP80 Cable
Only one supplied alternative offers a distinct, relevant cable option.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 for a short connection where its higher listed bandwidth is useful. The 10-foot cable is a better fit when the PC and monitor are farther apart and its listed 54Gbps modes cover the setup's requirements.
- This 10-foot Silkland cable is specified for 54Gbps and lists support for 4K at up to 240Hz, 8K at 120Hz, and 16K at 60Hz with DSC.
- It also supports DSC 1.2a and MST.
- The DP80 offers up to 80Gbps bandwidth in a 1.6-foot cable, making it suited to close placements and high-bandwidth modes.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a close-range gaming setup that needs a short cable and substantial bandwidth headroom.
Its listed display modes and gaming features are appealing, provided the monitor and graphics card support the modes you intend to use.
The deciding factor is reach: at 1.6 feet, it is specialized for nearby devices. Measure the connection path and confirm device support first; if both checks fit, the DP80 is a focused choice for a high-refresh-rate DisplayPort setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short, high-bandwidth cable for gamers connecting DisplayPort 2.1 monitors and graphics cards at high refresh rates.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; listed higher modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
- Gaming and display features include VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Male-to-male DisplayPort connectors with a no-latch design; backward compatibility with DisplayPort 2.0 and 1.4.